Skip to navigation Skip to content

Sagittarius Kensington Lever Bib Taps And Stands - White

Rated 3.75/5 from 4 customer reviews

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £41.33 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £31.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Pair of kitchen sink pillar taps for independent control & flow of hot/cold supplies
  • Polished Chrome with White ceramic details
  • Designed for use with two tap-hole sinks or decks
  • Quater turn ceramic valve mechanism
  • Suitable for all water systems with a minimum water pressure requirement of 0.5 bar

Read full product description

Features:
  • Chrome finish
  • White ceramic levers
  • Minimum of 0.5 bar of water pressure required
  • 10 year guarantee

Downloads
Cleaning Instructions
Product Overview
Product Code KL/295/C
Type 2 Hole Kitchen Taps, Kitchen Pillar Taps
Brand Sagittarius
Brand Range Sagittarius Kensington
GuaranteeMore information 10 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Finish Polished Chrome, White
Shape Round
Handle Type Dual Control, Lever
Spout Type Curved Spout, Fixed Spout
Texture Polished
Tap Holes 2 Holes
Style Traditional
Dimensions
Height (mm) 237
Depth (mm) 145
Projection (mm) 145
Flow Rate
Minimum Water PressureMore information 0.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(4)
Rated 3.75/5 from 4 customer reviews

£123.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.