Skip to navigation Skip to content

Vellamo Inspire Pull Out Mono Kitchen Mixer Tap - Brushed Brass

Rated 4.32/5 from 25 customer reviews

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £33.33 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £25.00 with Clearpay Learn more about Clearpay

What's great about it?

  • Multi-function pull out spray
  • Made from 304 grade stainless steel with a Brushed Brass finish
  • Easy to use single lever design
  • Includes flexi-tail connectors for easy installation
  • Long-lasting ceramic disc cartridges for a smooth, drip-free operation

Read full product description

Features:
  • Made from 304 grade stainless steel with ABS plastic spray head in an on-trend Brushed Brass finish
  • Includes flexi-tail connectors for easy installation
  • Multi-function pull out spray - perfect for cleaning or rinsing fruit & veg
  • Spout head can rotate 360° allowing the spray button to be hidden at the back of the spout as pictured above
  • Single lever design - easy find the perfect flow and temperature with one hand
  • Swivel spout - ideal for use with 1.5 and 2 bowl sinks
  • Ceramic disc technology - long-lasting and no drips
  • Minimum 1 bar water pressure required
  • 3 year guarantee

Dimensions:
  • Width - 103mm
  • Overall height - 398mm
  • Projection - 224mm
  • Tap hole size - Ø35mm
  • Maximum worktop thickness - 30mm

Downloads
Cleaning Instructions
Product Overview
Product Code PDT-000263
Type Mono Kitchen Mixers, Pull Out Kitchen Taps
Brand Vellamo
Brand Range Vellamo Inspire
GuaranteeMore information 3 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Finish Brushed Brass
Shape Round
Handle Type Lever, Single Control
Spout Type Pull Out Spout, Swan Neck Spout, Swivel Spout
Texture Brushed
Tap Holes Mono
Style Modern
Dimensions
Minimum Tap Hole Size (mm)More information 35
Width (mm) 103
Height (mm) 398
Projection (mm) 224

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Flow Rate at 1 Bar (l/min) 3.7
Flow Rate at 2 Bar (l/min) 5.7
Flow Rate at 3 Bar (l/min) 6.4
Minimum Water PressureMore information 1

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(25)
Rated 4.32/5 from 25 customer reviews

£99.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.