-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
From £739.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Perrin & Rowe Langbourn 4 Hole Curved Spout Mixer with Lever Handles & Pull-Out Rinse
The Langbourn straddles both contemporary and classic design and is available with either crosshead or lever handles. This three or four hole tap is designed to be work top mounted usually behind undermount sinks. This combination results in a most sophisticated arrangement.
This product features a Perrin & Rowe Hand Rinse. Easy to use and versatile, the rinses can be positioned to the left or the right of the sink. They have insulated handles and a flexible hose (standard length 120cm) ensuring safety and convenience. Hot, cold or mixed water is diverted to the rinse once the top button is pressed.
Quality Promise:
Features:
Dimensions:
This product features a Perrin & Rowe Hand Rinse. Easy to use and versatile, the rinses can be positioned to the left or the right of the sink. They have insulated handles and a flexible hose (standard length 120cm) ensuring safety and convenience. Hot, cold or mixed water is diverted to the rinse once the top button is pressed.
Quality Promise:
- Manufactured in the UK from the highest quality raw materials
- Employing the latest available technology and made from low lead brass
- Plated to a thickness that exceeds industry standards
- Assembled by hand and individually water tested to ensure peace of mind
- Made with ceramic disk valves supplied by the world's leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.
Features:
- Minimum 1 bar pressure required
- 360° swivel spout
- Maximum water pressure - 5 Bar
- Quarter turn ceramic disc flow control
- Single flow spout
- Vernier insert for accurate handle alignment
- Unique handle construction with integral bearing ring
- Includes flexible connectors for easier installation
- Twin lever handles
- Pull out spray rinse with insulated handle
Dimensions:
- Spout mounting hole - 35mm diameter
- Controls mounting hole - 30mm diameter
- 60cm pull out hose length
| Technical Specifications |
|---|
| Cleaning Instructions |
| Product Code | 4891cp-pv |
|---|---|
| Type | 4 Hole Kitchen Taps, Pull Out Kitchen Taps |
| Brand | Perrin & Rowe |
| Brand Range | Perrin & Rowe Langbourn |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | No |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Dual Control, Lever |
| Spout Type | 360 Degree Swivel Spout, Swan Neck Spout |
| Tap Holes | 4 Holes |
| Style | Traditional |
| Finish | Select an option first |
| Texture | Select an option first |
| Minimum Tap Hole Size (mm)More information | 30 |
|---|---|
| Hose Length (mm) | 600 |
| Height (mm) | 370 |
| Projection (mm) | 230 |
This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.
| Minimum Water PressureMore information | 1 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Advice guides
-
The Different Types of Pull Out Kitchen Taps
The choice of pull out kitchen taps on the market can appear overwhelming, especially if you’re not entirely sure what you’re looking for. In this guide we’ll run through the different types of pull out kitchen taps. We’ll tell you the difference between spring-loaded pull out taps and weighted pull out taps, and whether you need a pull out tap with multiple spray functions or not. -
Why a Pull Out Spray Kitchen Tap Is the Ultimate Accessory
There are many unsurpassable benefits to having a pull out kitchen tap with a spray hose, so discover the reasons why every kitchen should have one.
