Skip to navigation Skip to content

Perrin & Rowe Provence 4 Hole Sink Mixer with Lever Handles & Rinse

No reviews yet - Write one

RRP £928 save 12%

From £819.99

Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £273.33 with Klarna. More about Klarna
Clearpay
Pay 4 interest-free instalments of £205.00 with Clearpay. More about Clearpay

What's great about it?

  • Classic 4 hole sink mixer with pivoting spout & pull-out spray rinse with insulated handle
  • 4 finishes available: Chrome, Nickel, Pewter or Gold effect
  • Single flow tap for better flow rate & well-mixed water
  • Twin handles for temperature and flow control & push button to divert water to hand rinse
  • Suitable for high water pressure systems

Full details

The Provence an individual component tap which is designed to be fitted directly on to the work surface behind undermounted sinks.
This product features a Perrin & Rowe Hand Rinse. Easy to use and versatile, the rinses can be positioned to the left or the right of the sink. They have insulated handles and a flexible hose (standard length 120cm) ensuring safety and convenience. Hot, cold or mixed water is diverted to the rinse once the top button is pressed.

Quality Promise:
  • Manufactured in the UK from the highest quality raw materials
  • Employing the latest available technology and made from low lead brass
  • Plated to a thickness that exceeds industry standards
  • Assembled by hand and individually water tested to ensure peace of mind
  • Made with ceramic disk valves supplied by the world's leading manufacturer, tested to 5000,000 life cycles, equating to at least 25 years of domestic use.

Made in Britain


Features:
  • Available in chrome, polished nickel, pewter or gold finish
  • 5 year guarantee
  • Minimum 1 bar pressure required
  • Recommended working pressure: 1-5 bar
  • Quarter turn ceramic disc flow control
  • Single flow spout
  • 360° swivel spout
  • Vernier insert for accurate handle alignment
  • Unique handle construction with integral bearing ring
  • Includes flexible connectors for easier installation
  • Pull out spray rinse with insulated handle

Dimensions:
  • 60cm pull-out hose length
  • Mounting hole size - 30mm diameter for controls and 35mm for spout
  • 30mm diameter rinse mounting hole size
  • Tap hole centres - 150-400mm

Downloads
Technical Specifications
Cleaning Instructions
Product Overview
Product Code 4776cp-pv
Type 4 Hole Kitchen Taps, Pull Out Kitchen Taps
Brand Perrin & Rowe
Brand Range Perrin & Rowe Provence
GuaranteeMore information 5 Years
Features
AeratorMore information No
Cartridge TypeMore information Ceramic Disc
Popular Features Select an option first
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Dual Control, Lever
Spout Type Curved Spout, Swivel Spout
Tap Holes 4 Holes
Style Traditional
Finish Select an option first
Texture Select an option first
Dimensions
Minimum Tap Hole Size (mm)More information 30
Hose Length (mm) 600
Height (mm) 270
Projection (mm) 230
Flow Rate
Minimum Water PressureMore information 1

(0)
No reviews yet - Write one

RRP £928 save 12%

From £819.99

We're here for you

Rated 'Excellent'

Delighting customers for 10+ years. See reviews

Free delivery over £299

Standard delivery to most of UK, plus discounted next day rates too. See policy

90 days to change your mind

+ optional specialist collection service. See policy

Free consultations

Book a chat with our bathroom experts. More

Trade discounts

Thousands of trade professionals benefit from our extra discounts and dedicated account managers. Access now

Guides & inspiration

We've created an extensive range of design guides to inspire you. See more

As seen in

Good Housekeeping
House Beautiful
Grand Designs
Homes & Gardens
Real Homes
Ideal Home

Advice guides

Back to top

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.

Share your photos

1) Take a photo of your product and post it to Instagram.

2) Mention us with @tap.warehouse so we can see your photo when you post it.