-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
£99.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Ideal Standard Ceraflex Mono Basin Mixer Tap
Features:
Dimensions:
- Beautiful mono basin mixer tap with an easy to operate single lever handle
- Made from brass with a chrome plated finish to add a modern touch to your bathroom
- FirmaFlow® uses improved Click Technology with a mechanical stop to limit tap water flow to just the amount required and assists in maintaining flow consistency, while reducing usage by up to 50%
- FirmaFlow® also uses ceramic disc cartridges which will save you money on your water bill and provide you with superior safety
- LightMove® technology helps provide finer temperature adjustment between 34°C and 42°C, ensuring easier handle movement and control
- Temperature limit stop is an adjustable setting that controls and limits the water temperature to your preference to avoid scalding. Ideal for family homes and provides peace of mind
- EasyFix® system allows one-man installation thanks to the preassembled components that ensures a faster, hassle-free installation and saves up to 30% of the installation time
- Economic 5L/min aerator - this is an environmentally friendly, removable feature which limits the maximum flow rate whilst fusing air into the water flow. This results in a soft and bubbly flow of water
- Suitable for high-pressure water systems only - for more information, read our blog on water pressure here
- WRAS approved - this product is certified in compliance with the Water Regulations Advisory Scheme. To find out more information of the WRAS approval scheme, please see our blog post here
- Comes with flexible tails to simplify and speed up installation
- 5 year manufacturer's guarantee
Dimensions:
- Height: 159mm
- Width: 47mm
- Depth: 144mm
- Projection: 110mm
| Cleaning Instructions |
|---|
| Product Code | B2326AA |
|---|---|
| Type | Mono Basin Mixers |
| Brand | Ideal Standard |
| Brand Range | Ideal Standard Ceraflex |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| AeratorMore information | Yes |
|---|---|
| Material | Brass |
| Temperature Control | Manual |
| Cartridge TypeMore information | Ceramic Disc |
| Popular Features | WRAS Approved |
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome.
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Chrome, Polished Chrome |
| Shape | Curved, Round |
| Handle Type | Dual Control, Lever |
| Spout Type | Fixed Spout, Straight Spout |
| Texture | Polished |
| Tap Holes | Mono |
| Style | Modern |
| Width (mm) | 47 |
|---|---|
| Height (mm) | 159 |
| Depth (mm) | 144 |
| Projection (mm) | 110 |
| Flow Rate at 1 Bar (l/min) | 4.9 |
|---|---|
| Minimum Water PressureMore information | 1 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
Products from the same range
You may also like
Customers also bought
Popular related categories
Advice guides
-
How To Replace A Bathroom Tap
Replacing your basin tap can be a lot easier than you think. With this guide we show you how to remove your current basin tap and install a new one. -
Bathroom Taps: What You Need to Know
There is a huge variety of bathroom taps out there. This guide walks you through the questions that you should be asking yourself before choosing new taps for your bathroom. -
The Different Types of Basin Taps Explained
New bathroom basin taps are a great way of enhancing the overall look of your bathroom, en-suite or cloakroom bathroom without the need to spend money on a complete refurbishment. Choosing, however, is not quite as straightforward as it sounds, so we've put together a guide to explain the different types of basin taps and what you should be on the look out for.
