£79.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the nuie Beaumont Mono Basin Mixer with Pop-Up Waste
Other Features:
- Twin crosshead handles with white ceramic caps & indexes
- Independent control over hot & cold water supply
- Minimum of 0.2 bar water pressure or above
- Hard wearing and durable brass construction
- Easy-clean high-gloss chrome coating
- Easy installation & low-maintenance
- Includes fitting kit
Technical Specifications |
---|
Cleaning Instructions |
Product Code | I345X |
---|---|
Type | Mono Basin Mixers |
Brand | nuie |
Brand Range | nuie Beaumont |
GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
Cartridge TypeMore information | Compression Washer |
---|
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Mounting Type | Deck Mounted |
---|---|
Finish | Polished Chrome |
Shape | Round |
Handle Type | Crosshead, Dual Control |
Spout Type | Curved Spout, Fixed Spout |
Texture | Polished |
Tap Holes | Mono |
Style | Traditional |
Width (mm) | 50 |
---|---|
Height (mm) | 105 |
Projection (mm) | 120 |
Flow Rate at 0.1 Bar (l/min) | 2.4 |
---|---|
Flow Rate at 0.5 Bar (l/min) | 5.8 |
Flow Rate at 1 Bar (l/min) | 8.4 |
Flow Rate at 2 Bar (l/min) | 12.1 |
Flow Rate at 3 Bar (l/min) | 15 |
Minimum Water PressureMore information | 0.2 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.