Skip to navigation Skip to content

Harbour Clarity Brushed Brass Wall Mounted Basin Mixer Tap

No reviews yet - Write one

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £49.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £37.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Highly-desirable brushed brass finish
  • Long-lasting ceramic disc cartridges
  • 10 year guarantee
  • Matching brushed brass bath taps available

Read full product description

Offer

This Harbour Clarity 2 hole basin mixer will offer a sleek and modern finish to your bathroom that is compatible with all water pressure systems. Being wall mounted offers more space around your basin appealing to a minimalist design. Made from solid brass and finished in a stunning Brushed Brass finish that is both practical and aesthetically pleasing. Not to forget that this is covered by a 10 year manufacturer guarantee offering you peace of mind.

Features:
  • Modern & minimalistic design
  • Ceramic disc technology
  • Made from solid brass with zinc alloy handle
  • Minimum 0.3 bar water pressure required
  • 10 year manufacturer's guarantee

Downloads
Cleaning Instructions
Product Overview
Product Code HBCLA45
Type 2 Hole Basin Mixers, Wall Mounted Basin Taps
Brand Harbour
Brand Range Harbour Clarity
GuaranteeMore information 10 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Material Brass
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Wall Mounted
Finish Brushed Brass
Shape Round
Handle Type Lever, Single Control
Spout Type Curved Spout
Texture Brushed
Tap Holes 2 Holes
Style Modern
Dimensions
Height (mm) 112
Projection (mm) 154
Flow Rate
Flow Rate at 0.1 Bar (l/min) 2.9
Flow Rate at 0.2 Bar (l/min) 2.9
Flow Rate at 0.5 Bar (l/min) 4.5
Flow Rate at 1 Bar (l/min) 6.4
Flow Rate at 1.5 Bar (l/min) 7.8
Flow Rate at 2 Bar (l/min) 9.2
Flow Rate at 3 Bar (l/min) 11.2
Flow Rate at 4 Bar (l/min) 12.8
Flow Rate at 5 Bar (l/min) 14.1
Minimum Water PressureMore information 0.3

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(0)
No reviews yet - Write one

£149.99

Was £169.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.