-
Click the image to zoom
-
Click the image to zoom
£57.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Deva Profile Bath Pillar Taps
Gold taps are not just making a comeback in the kitchen, they're having a renaissance in the bathroom as well. The Deva Profile bath pillar taps require a minimum of just 0.1 bar of water pressure, so they are suitable for all water systems, whether you have a gravity-fed system or a combi-boiler. Their design will look stunning in any contemporary or period bathroom.
Features:
Dimensions:
Features:
- Stunning gold finish
- Minimum 0.1 bar pressure
- 5 year guarantee
Dimensions:
- Tap height - 76mm
- Spout exit height - 25mm
- Projection - 85mm
| Technical Specifications |
|---|
| Cleaning Instructions |
| Product Code | DCM102/501 |
|---|---|
| Type | Bath Fillers, Bath Pillar Taps |
| Brand | Deva |
| Brand Range | Deva Profile |
| GuaranteeMore information | 5 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Number of Outlets | 2 Outlets |
|---|---|
| Temperature Control | Manual |
| Cartridge TypeMore information | Compression Washer |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Finish | Polished Gold |
| Shape | Round |
| Handle Type | Dual Control, Round |
| Spout Type | Straight Spout |
| Texture | Polished |
| Tap Holes | 2 Holes |
| Style | Modern |
| Height (mm) | 76 |
|---|---|
| Projection (mm) | 85 |
| Minimum Water PressureMore information | 0.1 |
|---|
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
