-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
-
Click the image to zoom
From £118.99
Was £177.99
Recommended Extras
We've hand-picked these items because they are a great choice alongside the Crosswater Wisp Monobloc Basin Tap
Are you in need of a chic and visually appealing basin tap? This is what you can get when you choose the Crosswater Wisp basin monobloc! It is a compact basin tap and compared to its taller sibling, it can give you the same efficient water flow without being too high. It is perfect for smaller basins and can give you more of a subdued level of balance. The slender spout neck and lever have that minimalist appeal and are great for modern bathrooms too!
Features:
Dimensions:
Features:
- Ceramic disc technology
- High quality brass construction
- Deck mounted
- 15 years manufacturer's guarantee
- 0.5 bar minimum water pressure
- Suitable for low pressure water systems
Dimensions:
- Height: 157mm
- Projection: 120mm
| Cleaning Instructions |
|---|
| Product Code | WP110-PV |
|---|---|
| Type | Mono Basin Mixers |
| Brand | Crosswater |
| Brand Range | Crosswater Wisp |
| GuaranteeMore information | 15 Years |
Guarantee
Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.
If you need further info about a specific manufacturer's guarantee, please contact our team.
| Material | Brass |
|---|---|
| Cartridge TypeMore information | Ceramic Disc |
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.
Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
| Mounting Type | Deck Mounted |
|---|---|
| Shape | Round |
| Handle Type | Lever, Single Control |
| Spout Type | Fixed Spout, L-Shaped Spout |
| Tap Holes | Mono |
| Style | Modern |
| Finish | Select an option first |
| Texture | Select an option first |
| Width (mm) | 55 |
|---|---|
| Height (mm) | 157 |
| Depth (mm) | 168 |
| Projection (mm) | 120 |
| Flow Rate at 0.5 Bar (l/min) | 4.3 |
|---|---|
| Flow Rate at 1 Bar (l/min) | 5.1 |
| Flow Rate at 1.5 Bar (l/min) | 5.1 |
| Flow Rate at 2 Bar (l/min) | 7.3 |
| Flow Rate at 3 Bar (l/min) | 10.5 |
| Flow Rate at 4 Bar (l/min) | 10.5 |
| Minimum Water PressureMore information | 0.5 |
Minimum Water Pressure
Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.
- With a combi boiler you can usually expect between 1 and 2 bar
- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs
- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar
You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.
