Skip to navigation Skip to content

Clearwater Dorman Single Lever Mono Kitchen Mixer With Swivel Spout & Extended Handle

Rated 2.00/5 from 1 customer review

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £49.99 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £37.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Single lever monobloc kitchen mixer with swivel spout
  • Hard-wearing brassware with corrosion-resistant polished chrome plating
  • Extra long single top lever to aid independent living
  • 360° rotation spout for ease-of-use and extra accessibility
  • Suitable for all water systems with a minimum water pressure requirement of 0.5 bar

Read full product description

The Dorman's extra long control lever is an aid to one's reach and also helpful when hand dexterity is limited.

Other Features:
  • Hand-polished chrome finish
  • Quarter turn ceramic disc

Dimensions:
  • Overall height - 200mm
  • Spout exit height - 140mm
  • Projection - 225mm
  • Minimum tap hole size - Ø35mm

Downloads
Technical Specifications
Cleaning Instructions
Product Overview
Product Code dorcp
Type Mono Kitchen Mixers
Brand Clearwater
Brand Range Clearwater Dorman
GuaranteeMore information 5 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
AeratorMore information Yes
Cartridge TypeMore information Ceramic Disc
Tap aerators are simple but beautifully-engineered devices that save water and money without a perceived loss of pressure. These small attachments are inserted inside the end of the spout and provide a regulated, smoothed and aerated flow of water by separating a single flow into many tiny streams. These streams mix with air as they flow from the tap, meaning less water is needed to achieve the same 'feel' and performance as non-aerated taps.

They can also be purchased separately and retrofitted to most taps, or they can usually be uninstalled if not wanted. They're a great benefit on high pressure systems where the full flow of water is unnecessary, cutting your water bills and helping to reduce wastage. On lower-pressure systems they can help to improve the performance of a tap by adding air to the limited flow of water available. All-in-all, they're pretty awesome. 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Finish Polished Chrome
Shape Round
Handle Type Lever, Single Control
Spout Type 360 Degree Swivel Spout, Straight Spout
Texture Polished
Tap Holes Mono
Style Modern
Dimensions
Minimum Tap Hole Size (mm)More information 35
Height (mm) 200
Projection (mm) 225

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Minimum Water PressureMore information 0.5

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(1)
Rated 2.00/5 from 1 customer review

£149.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.