Skip to navigation Skip to content

Blanco Mida-S Single Lever Mono Pull Out Kitchen Mixer Tap with Silgranit Matching Finish

Rated 5.00/5 from 1 customer review
Please select an option

Loading delivery estimate...

Klarna
Pay 3 interest-free instalments of £92.66 with Klarna Learn more about Klarna
Clearpay
Pay 4 interest-free instalments of £69.50 with Clearpay Learn more about Clearpay

What's great about it?

  • Available in 4 different finishes to match our Blanco Silgranit composite sinks
  • Extendable fabric-sheathed pull out hose extends the reach of the tap
  • Easy to use single lever control - control the flow and temperature with one hand
  • Ceramic disc technology - smooth on and off motion, long-lasting and no drips
  • LGA and DVGW approved
  • Minimum 2 bar water pressure required
  • Patented jet regulator reduces limescale buildup in the nozzle

Read full product description

Features:
  • Modern pull out kitchen tap with extendable fabric-sheathed pull out hose
  • Available in 4 different finishes to match our Blanco Silgranit composite kitchen sinks - also available in a Polished Chrome or Matt Black finish
  • 360° swivel spout
  • Easy to use single lever control
  • Ceramic disc technology - long-lasting and no drips
  • LGA and DVGW approved
  • Requires a minimum 2 bar water pressure
  • Patented jet regulator reduces limescale build-up
  • Stabilisation plate required when installing on a stainless steel sink - please see our recommended extras
  • Includes 350mm flexi-tail connectors for easy installation

Dimensions:
  • Overall height - 336mm
  • Spout exit height - 200mm
  • Projection - 186mm
  • Tap hole size - Ø35mm
  • Maximum worktop thickness - 50mm

Downloads
Cleaning Instructions
Product Overview
Product Code BLANCO521461
Type Mono Kitchen Mixers, Pull Out Kitchen Taps
Brand Blanco
Brand Range Blanco Mida
GuaranteeMore information 5 Years

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Features
Cartridge TypeMore information Ceramic Disc
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.
Style
Mounting Type Deck Mounted
Shape Round
Handle Type Lever, Single Control
Spout Type 360 Degree Swivel Spout, Pull Out Spout, Swan Neck Spout
Tap Holes Mono
Style Modern
Finish Coffee
Texture Matt
Dimensions
Minimum Tap Hole Size (mm)More information 35
Height (mm) 336
Projection (mm) 186

This is the minimum recommended hole diameter that this tap needs for installation. Generally, the tap will sit on top of the sink or worktop, and the hot and cold water feeds and fixing bolts will need to slot through the tap hole and be connected underneath. Your hole can be a bit larger than this size, provided it is not larger than the diameter of the base of the tap.

Flow Rate
Minimum Water PressureMore information 2

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

(1)
Rated 5.00/5 from 1 customer review

£277.99

Advice guides

Back to top

Products with estimated delivery dates take a little longer to get to you safely and are not available for next day delivery.

We will do our utmost to meet these estimates, although we recommend you do not book an installer until you have received and checked your order.

If you are in a hurry, view similar products available for next day delivery.