Skip to navigation Skip to content

Need help? We're open today until 7:45pm

Search

Spring Sale + 10% off showering with code SH10. Code ends:

1d 19h 10m 2s

Spring Sale + 10% off showering with code SH10. Code ends:

1 day 19 hours 10 minutes 2 seconds

Wall Mounted Taps

Nothing creates a finer look in your bathroom than a wall mounted basin or bath tap. As well as creating a stunning focal point in your bathroom, wall mounted taps also help to keep your bathroom cleaner, and not just visually. With deck mounted taps, it's so easy for dirt and calcium deposits to build up on and around your bath ledge and basin, and unless you remove the taps completely when you're cleaning, there's always going to be an area that is just too hard to clean. With a wall mounted tap, there's nothing cluttering up the bath or basin ledge, and nowhere for the dirt to build up.

At Tap Warehouse, we have a fantastic variety of wall mounted bathroom taps, from waterfall basin and bath taps to bath shower mixers. We stock wall mounted taps from leading names like Crosswater and Vado, as well as our own Vellamo range which are not only pleasing on the eye, but pleasing on the wallet as well.

Showing 37-72 of 223 products

Load Previous Products

You've viewed 72 of 223 products

Load More Products

Free Delivery Offer
Returns Information
Help Hub

Back to top

Minimum Water Pressure

Your water pressure depends on your home's water system. It’s important to consider water pressure when buying a new tap or shower. Buying a product with a minimum water pressure that’s too high for your home will result in poor performance.

- With a combi boiler you can usually expect between 1 and 2 bar

- With a gravity system (cold water tank in attic) you may have as little as 0.1 or 0.2 bar upstairs, and perhaps 0.5 bar downstairs

- With a high pressure unvented system (hot water cylinder, no cold water tank) you will generally have between 1 and 3 bar

You can install an item with a low minimum pressure rating on a high pressure system, but avoid installing an item with a high minimum rating on a low pressure system! Read our guide to water pressure to learn more.

Guarantee

Please note that these guarantees are provided by the manufacturer, and will be subject to individual exclusions, exceptions, and terms and conditions, for example avoiding abrasive bleach-based cleaning products.

If you need further info about a specific manufacturer's guarantee, please contact our team.

 
Taps use either a ceramic disc cartridge or a rubber compression washer to control flow. Rubber washers will naturally wear down with use, and the tap handle will require more and more rotations to turn on or off. On the plus side, it's very easy to replace a rubber washer and they're available everywhere. 

Ceramic disc cartridges need only a 90-degree rotation to fully open or close, and the 2 ceramic plates are incredibly hard-wearing and resilient. They're more expensive to make, but they allow for a huge range of designs, easy operation and simple maintenance if needed.

Whilst it is rare for a ceramic cartridge to need replacing, you may very occasionally need to remove and rinse the cartridge if grit or debris within the water system is preventing the 2 plates from closing properly. Much like replacing a rubber washer, this is a quick and easy job, and will ensure many years of use.